3RD AND 4TH PLAYER PGM PIN OUT

The JAMMA+ harness found in PGM boards is a 34 pin IDE connector. The following pinout shows the connector from the system side.

Top row	Pin	Pin	Bottom row
GND	1	2	Speaker +
GND	3	4	Speaker +
Blue	5	6	Green
Red	7	8	GND
GND	9	10	Sync
Coin counter 1	11	12	Coin counter 2
Test	13	14	Service
Player 3 Button D	15	16	Player 4 Button D
Player 3 Button C	17	18	Player 4 Button C
Player 3 Button B	19	20	Player 4 Button B
Player 3 Button A	21	22	Player 4 Button A
Player 3 Right	23	24	Player 4 Right
Player 3 Left	25	26	Player 4 Left
Player 3 Down	27	28	Player 4 Down
Player 3 Up	29	30	Player 4 Up
Player 3 Start	31	32	Player 4 Start
Player 3 Coin	33	34	Player 4 Coin

This port can be used with a JAMMA 4 player extension cable for two cabinets, or with controllers wired to the harness.